• Follow us

Embossing Motorbike Plate Reflective Film

XW6600 reflecting sheeting is suitable for motorbike plate and number plate with the good performance of embossing depth at 0.8-1.0mm.

Description

XW6600 reflecting sheeting is suitable for motorbike plate and number plate with the good performance of embossing depth at 0.8-1.0mm. The tensile rate of over 90% and strength of 25N at least all enhance its capability. It’s best applied to flat surfaces such as aluminum or those having only moderate compound curves. 

Key Features 

• Durable, retroreflective sheeting 

• Excellent angularity in both horizontal and vertical 

• Easy to apply 

• Up to 3 years’ exterior durability 

• Additional roll widths available upon request 

• Embossing, hot stamping, screen printing Application and Uses

Application and Uses

Mainly for license plate, number plate, motor plate.

Main Characteristic

Property

Description

Adhesive color and type

Clear, Pressure Sensitive

Liner

130 Gram

Application Surfaces

Flat without rivets

Application

Aluminum, stainless steel and automotive paint

Application temperature range

18 ℃ to 28 ℃

Roll size

1.24m*45.7m(48inch*50yard)

Embossing depth

0.8-1 mm

Strength

≥25N

Tensile rate

≥90%

Color 

White, yellow

General Performance Characteristics

The durability of XW6600 depends on the following:

• Selection, preparation and temperature of the substrate

• Ink formulation 

• Drying methods 

• Application methods

• Cleaning and maintenance methods

• Exposure conditions 

Product Data

Durability

3 years

Retroreflective Elements

Reflective glass bead

Film Thickness

110-120 mics  

Face Film

Acrylic

Adhesive

30 mics oil base pressure-sensitive adhesive

Release Liner

130 Gram

Application Surface

Flats surface only such as aluminum

Application Temperature

18℃-28℃

Feature

Tearable, embossing, hot stamping, screen printing 

Coefficient of Retroreflection

20 cd/lux for white at 0.2/4

Cutting

The recommended methods of cutting as follows:

· Hand cut 

· Band sawing

· Cold and hot steel-ruled die cutting

· Drum-type electronic cutting or flat-bed electronic cutting if equipment available

When using any equipment, take care and always follow the manufactures’ instruction for safe operation. 

Maintenance and Cleaning

The cleaner must be wet, non-abrasive, without strong solvents and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline). 

To remove grease, oil, or tar, use cloth moistened with heptane, VM&P naphtha or mineral spirits. 

Using high pressure cleaning equipment, the following conditions should be applied/ set up:

• Cleaning wand to be held at no greater angle than 15 degree from perpendicular to the sheeting surface

• Wide spray pattern 

Storage and Shelf Life

1. Reflective Sheeting must be used within 1 years after date of receipt from XW; 

2. Partially used Rolls should be returned to the shipping carton or suspended horizontally from a rod or pipe through the core; 

3. Store the sheeting in a clean, dry area at 20 ℃ and 50% relative humidity and away from direct sunlight.

XINGWEI is one of the largest China embossing motorbike plate reflective film suppliers, offering discount products and customized service to make customers 100% satisfied. Welcome to check the pricelist with us.

Related Products

Feedback